Systems · 02
Hydrants and hose cabinets
The tool of the emergency brigade and the fire department. If pressure does not reach the nozzle, the rest of the system is decorative.
We install private fire service mains with exterior hydrants, fire department connections, standpipes and cabinets equipped with double-jacket hose, nozzle, angle valve and accessories.
Design follows NFPA 14 and NFPA 24: hydrant spacing, residual pressure and flow at the most remote point, and real access for the fire apparatus. That last item is routinely ignored and discovered too late.
We verify the full network with hydrostatic and flow tests, and document the available pressure at every outlet.
Where it applies
- Industrial parks and manufacturing plants
- Sites with perimeter vehicle circulation
- Multi-story buildings (standpipe systems)
- Distribution centers and maneuvering yards
- Facilities with an internal emergency brigade
Other systems
Automatic sprinklers
Wet, dry, preaction and deluge systems under NFPA 13, with calculated density.
03Piping networks and fire pump rooms
Tank, main pump, jockey pump and listed controller sized under NFPA 20.
04Detection and alarm
Addressable panels, detectors, manual stations and notification under NFPA 72.
05Special hazard suppression
Clean agents, foam and kitchen systems for hazards where water is not the answer.
06Extinguishers and signage
Selection, placement, recharge and signage under NFPA 10 and NOM-002-STPS.
Next step
Have a project, a pending inspection, or a system that no longer complies?
Tell us what the building is and what stage you are in. If we can solve it, we will tell you the scope and investment range. If we cannot, we will tell you that too.