Systems · 05
Special hazard suppression
Some assets are destroyed by water as thoroughly as by fire. Those need a different answer.
We design and install clean agent systems under NFPA 2001 for server rooms, control rooms, substations and archives: they extinguish without residue and without damaging the protected equipment.
For flammable liquid hazards — process areas, tanks, loading bays — we engineer foam systems. For commercial kitchens, wet chemical hood systems under NFPA 17A and NFPA 96, with automatic gas and ventilation shutdown.
Every system is calculated by agent concentration and enclosure volume, and includes enclosure integrity testing. A room that does not seal will not hold the agent, and the system will not extinguish.
Where it applies
- Data centers and server rooms
- Control rooms and electrical substations
- Archives, vaults and critical storage
- Process areas with flammable liquids
- Commercial and industrial kitchens
Other systems
Automatic sprinklers
Wet, dry, preaction and deluge systems under NFPA 13, with calculated density.
02Hydrants and hose cabinets
Exterior hydrants, fire department connections and equipped cabinets under NFPA 14 and 24.
03Piping networks and fire pump rooms
Tank, main pump, jockey pump and listed controller sized under NFPA 20.
04Detection and alarm
Addressable panels, detectors, manual stations and notification under NFPA 72.
06Extinguishers and signage
Selection, placement, recharge and signage under NFPA 10 and NOM-002-STPS.
Next step
Have a project, a pending inspection, or a system that no longer complies?
Tell us what the building is and what stage you are in. If we can solve it, we will tell you the scope and investment range. If we cannot, we will tell you that too.